TRANSFER RATE WORKSPACE

Data Rate Converter

Convert decimal bit rates, decimal byte rates, and binary byte rates per second while keeping symbol case and prefix convention visible.

Reviewed reference factorsValues stay in this browser tabRate conversion only; payload size, protocol overhead, compression, congestion, latency, and transfer completion time are not estimated.

Conversion input

Convert a stated digital transfer rate

Enter the throughput printed by a network, disk, application, or test. Match lowercase bit and uppercase byte symbols, then select decimal or binary prefixes deliberately.

Find a unit9 / 9

Filter by unit name, symbol, or code. Your current selections remain available.

Known value0 / 80

Enter a non-negative rate. Confirm whether the source reports bits or bytes and whether its prefix is decimal or binary.

Convert from

Choose the unit attached to the value you entered.

Convert to

Choose the unit required for your report, estimate, or comparison.

Displayed precision

Choose the maximum decimal places shown. This does not increase source accuracy.

Conversion runs locally after the active reference catalogue loads.

Conversion result

Your checked conversion appears here

Load the reviewed example or enter a value to compare every available data rate unit.

What this tool delivers

Data Rate conversion contract

This workspace converts information per second and does not treat a storage-capacity label as a sustained transfer measurement.

What it converts

Converts bit/s, kbit/s, Mbit/s, Gbit/s, B/s, kB/s, MB/s, KiB/s, and MiB/s.

What you provide

A reported numeric rate, exact bit-or-byte symbol, prefix convention, destination unit, and display precision.

What you receive

A selected throughput equivalent, bit-per-second equation, all supported rates, and CSV output.

Calculation method

How bit, byte, decimal, and binary rates stay distinct

Every source rate is first expressed in bits per second. One byte is eight bits; decimal kilo and mega use powers of 1,000, while kibi and mebi use powers of 1,024 bytes. The destination factor is then applied without estimating overhead.

Review the IEC binary-prefix conventions

Quick answers

Data Rate Converter questions

Why is 100 megabits per second not 100 megabytes per second?

A byte contains eight bits, so 100 Mbit/s equals 12.5 MB/s before any overhead. Symbol case matters: lowercase b denotes bit and uppercase B denotes byte. Real delivered file speed may be lower because framing, protocol headers, retransmissions, congestion, storage performance, and measurement windows are outside this conversion.

What is the difference between MB/s and MiB/s?

MB/s uses the decimal megabyte, or 1,000,000 bytes per second. MiB/s uses the binary mebibyte, or 1,048,576 bytes per second. They are not interchangeable labels. Match the convention reported by the device or software and always retain the exact symbol when communicating the converted result.

Can this tell me how long a download will take?

No. A transfer-time estimate also needs payload size and a defensible sustained payload rate. Advertised link speed may include protocol overhead and may vary over time. Convert the rate here, then use a separate transfer-time model that states whether size uses decimal or binary units and includes realistic efficiency assumptions.